Description
The XHD Scraper Tools makes easy work of tough build up. Use the Hawk Scraper to remove tile adhesives, carpet backing, industrial grease & soil, and coatings from hard surfaces. 13”, 17”, and 20” sizes. The Scraper drives six 1”x1” carbide steel blades, each on a dual-position rigid mount. Electroplated for corrosion resistance. Drive the Scraper with a Hawk Severe Duty Floor Machine.
Engineered Design
• Three sizes – 13″, 17”, and 20″
• 3/8” thick steel plate construction. The plate is e-coated for corrosion resistance.
• The plate is fit with six (3 or 6) tungsten steel cutter holders mounted with accessible allen head bolts
• Each cutter holder carries one (1) 1” x 1” carbide cutting blade. Each blade has 8 cutting edges.
• Mount the blade for a wide cutting edge, or a sharp cutting point
• The Hawk Scraper mounts on the floor machine with a custom milled aluminum clutch plate on a riser (included).
• The aluminum clutch plate won’t seize onto gear drive hub
• Add the optional dust ring and vacuum mounting kits on your Hawk floor machine for handling dusty soils
• Add optional machine weights on your Hawk floor machine for greater down pressure and faster scraping results
• Order replacement cutter blades #HPA0033RC – set of 3
Safety Tips
• Always unplug the floor machine before mounting or removing the Scraper
• Always wear gloves when handling sharp cutting edge tools
Specifications
Model | 13″ Scraper | 17″ Scraper | 20″ Scraper |
Item # | #HP0035 | #HP0033 | #HP0034 |
Machine Size | 13″ | 17” | 20″ |
Drive Plate Size | 12″ | 16″ | 19″ |
Drive Speed | 165 RPM | 165 RPM | 165 RPM |
Weight | 27 lbs. | 34 lbs. | 39 lbs. |
Cutter Blade Size | 1.0″ x 1.0″ 1/4″ |
Clutch Plate | Aluminum #NP9200 Plate with Custom Milled Design |
Riser | 1.50 Tall Plastic |
Floor Machine Required | 1.5 HP Severe. Duty with 11:1 Industrial Gear Set |
Reviews
There are no reviews yet.